GRAVITATIONALRESEARCH.COM

GRAVITATIONALRESEARCH.COM

header photo

GRAVITATIONALRESEARCH.COM

gravity , research ,  gravitational , research , gravitational research ,

robin dusty graves , robindustygraves.com , robin dusty ,

robindusty.com , dusty graves , dusty graves.com , robin - dusty - graves ,

robin-dusty-graves.com , kid bots , kidbots.com ,

 A long, long, time ago, and far, far away, when the dinosaurs roamed the earth,

I was in grade 10, in Ontario, Canada.

An experimental study program was offered, that allowed students to take time
off regular studies to investigate any subject that they were interested in. For
example, if you were interested in building airplanes, you could go to an aircraft
factory, and study and learn on the actual location. If you liked accounting, you
could work in a real accounting office. etc.

I was always interested in GRAVITY, since it seemed to be the final frontier in
man's scientific knowledge, --even Albert Einstein was not able to incorporate
GRAVITY into his theories of Relativity! There was a comic book entitled
"Prisoners of Gravity" which became a TV program - either way, it drove
home the point that mankind is, indeed "prisoner" to gravity... Through
my Physics teacher, I was given an office at Atomic Energy of Canada,
Chalk River Nuclear Laboratories, where I researched the libraries there
for information, and built a multiple motor driven gyroscopic lever
assembly to test the affect that "SPIN" had on gravitational readings.
Over the weeks at A.E.C.L., I exhausted the traditional information
sources and finally ended up looking at an obscure treatise in RUSSIAN !
I found out later that my office belonged to Dr. Stan Hatcher, the President
and Chief Executive Officer of Atomic Energy of Canada Limited! He was
regularly traveling across Canada, and around the world, so it just
happened that he was away while I needed an office. Oprah Winfrey
states, "There is no such thing as a coincidence", and perhaps this is
just one of a long STRING of happenstances on my part, since eventually

I ended up working at A.E.C.L.! Long before this Grade 10 project, I had
met J. Robert Oppenheimer, ** "Father of the Bomb", project leader of the
team at Los Alamos New Mexico, that constructed and ignited "Trinity",
the first Nuclear Bomb of mankind, code named "The Manhattan Project",
in 1945. Needless to say, I did not discover radically new information on
GRAVITY, but since then, I have always paid attention to TIDBITS of
scientific news that relates to gravity. Whenever I mentioned that I
was looking at "Gravitational Research" in the past,
any scientist laughed-- since there WAS no such thing.
For thousands of years, the traditional wisdom was
that GRAVITY just "IS", Get used to it- there is nothing you can do
about it! However, over the past couple of decades, there are University
and Research facilities around the world that now are clearly labeled
"GRAVITATIONAL RESEARCH CENTER", so that I now have the last
laugh! I have been using "Gravitational Research" for a long time,
often just to fill in a BLANK in a form that DEMANDS that I fill it in

with a CORPORATION NAME, before I can "SUBMIT" the form online !

In Switzerland and France, the large underground cyclotron at CERN ,
using 12 Tera electron volts, has verified the existence of the predicted
HIGGS BOSON ( also known as the GOD PARTICLE ) that also verifies the
likelyhood that the STRING THEORY and associated physics, may be
the key to future science. Einstein knew that Energy was equal to Mass
( E= mc2 or Energy [E in ergs] equals mass [m], times the speed of light
[ c ] squared, or, in simple terms, if you have a grain of sand, and want
to turn it into its equivalent in pure energy, you multiply the mass,
times 186,000 times 186,000 to get the "Energy" it would produce.
Obviously 186,000 x 186,000 is a LOT of energy, and a tiny grain

of sand, if converted to pure energy, could heat your home for a year! )
However, what Einstein could not know, is that years later, "now", we
know that with string theory, Mass = Energy is far more literal than
previously thought. The tiny, hard, round, "marbles" drawn in
diagrams in Chemistry and Physics books that I read, that represented
the PARTICLES that made up ATOMS, such as the Proton, and the
Electron, are now replaced with round, hollow circles of WAVES or
STRINGS of energy! Each particle, such as a Proton, or Electron is
made of building blocks that are a STRING or WAVE of energy, with
a different FREQUENCY. ( if you play a harp, each string has a different
note that vibrates at a different FREQUENCY ). So that now, that
HARD, SOLID, object of MASS, is composed of "energy" looped in a
STRING, with a specific frequency. OR,... Matter, or MASS, "IS"
Energy... MASS is not really a "something" that can be "converted"
to Energy, .... it "IS" energy... Also, with the STRING THEORY,
there are 11 dimensions, instead of the 4 dimensions we now use,
the X-axis, the Y-axis, the Z-axis, and 't' or time. For example.
Travel 4 blocks NORTH (X), 6 blocks WEST(Y), and go up 12 floors

in the building there(Z), at 6:00 PM(t), and I will meet you there. All
4 pieces of information are critical in defining a specific event. ( Meet
me - If you arrive at 10:00 PM, I won't be there, If you go 7 blocks
WEST, you are at the wrong building, etc. ) But in string theory,
there are 11 dimensions, and we primitive earthlings are only aware
of 4. Other new things happen in string theory. Our entire UNIVERSE,
with billions of galaxies stretching as far as we can see, is much like a
single slice of bread in a large loaf. On either side of our universe, are
other slices or BRANEs ( from mem-BRANE ) of parallel universes, that
we cannot immediately perceive. (search for Ed Witten, the new Albert
Einstein) GRAVITY, once thought to be a weak force, since we could
not "grab" it, turn it on, turn it off, bend it, increase it, stop it, create it,
etc. is now known to be a VERY STRONG force, however,-- it is the only
STRING of energy that is NOT locked on our 'slice" or BRANE that holds
our universe. Gravity, unlike all other strings, can drift off the BRANE

we live on. Thus, in 1945, when Oppenheimer, et-al , set off the first Nuclear
Explosion, and created a massive GRAVITY WAVE, the wave would travel
across other BRANES or 'slices' containing other universes, and notify
them all of our presence! This would be in addition to the massive
electromagnetic blast, still expanding outwards, that clearly
marks our presence, in 'This" part of our local Galaxy! Many "impossible"
events are now perfectly explained in String Theory. For example, by
colliding two high energy beams in a particle accelerator or cyclotron,
the explosion of the collision produces the CREATION of matter.
Particles are made out of thin air. ( for the past 100 years, the rule
was "MATTER CAN NEITHER BE CREATED NOR DESTROYED")

Even more startling, researchers could create an explosion of energy, and
the particle would appear in a laboratory 1/4 mile away. In China,
scientists have announced creating mass 3 miles away from the
cyclotron. With multiple parallel universes, traveling from one
point to another "Instantly" ( Beam me up , Scotty) (ie, faster
than the speed of light ), 11 dimensions, and more, it appears that
'anything' is possible. I "Guess" that cracking the secrets of
GRAVITY is soon to follow.

I will be creating a GRAVITY folder on my website, kidbots.com .
In the "BACK" folder, WEBADD, where I "ADD" things to the "WEB",
I will create
kidbots.com/WEBADD/GRAVITY
 and the html ( hyper text markup language ) "PAGE" to view will be
 kidbots.com/WEBADD/GRAVITY/GRAVITY.html
 I will show some interesting information, such as the technology
used by the Egyptians, 10,000 years ago to move 100 Ton blocks
of stone. Or, the devices used by the creator of the Coral Gardens in

Florida. The inventor, who weighed less than 100 pounds, cut, and
moved 30 ton chunks of coral and rock, by himself, using a collection
of radio tube frequency generators, powered by a little gasoline
engine and electrical power plant. I had been reading about him for
years, but did not understand how he did it until I saw a photograph
of a small shed on the property. People said that after he died, all they
found were a number of old, 'useless' radio tube frequency generators,
in the shed... Once I saw the tube sets I understood exactly what he was
doing- the "old useless" tube sets were PRICELESS! The Mayans cut and
moved 10, 20, 30 TON and larger sections of STONE, often in jungles
where the soft soil was 25 feet deep - we could not make large stone walls
there, even today, since the cranes needed would sink 15 feet into the
ground! The Mayans cut a square cave, with about 100 foot sides, through
the entire Andes mountains, laser straight, with no chisel or cut marks,
on about a 30 degree slope, from the interior, through the entire ANDES
mountains, continuing on the other side, more than 3 miles under the
Pacific Ocean - over 4,000 years ago! We could not do this today, since

our machines cut round holes, and leave huge cuts, and over a distance
of 300 miles or so would drift off center! Ancient city walls all over the
world have blocks that weigh up to 100 tons, and are carried hundreds
of miles. We may be 5,000 years behind, but with the new physics of
String theory, GRAVITY, as the untouchable force that makes us
"Prisoners", may soon open up its secrets...
  Noting that all particles in an atom are "Frequencies", the inventor,
John Kenneth Hutchison, in Vancouver, British Columbia, Canada, used
several tons of surplus military Microwave, Radar, Frequency generators,
Telsa generators ( see The Philadelphia Experiment ), to bombard a
small area with energies at different frequencies. He produced what
are known as the "HUTCHISON EFFECTS". *@*@ A block of wood would sink
into a block of steel. Metal would disappear or catch fire or crumble
and turn to rust. Things would loose weight and drift upwards
(anti-gravity ). All of these things were observed within a few blocks
surrounding the Twin Towers of 911. See drjudywood.com or
www.hutchisoneffect.ca or search 'hutchison effect' on google. I was

surprised that after a few years of my supporting John Hutchison
on wikipedia.org, the HUTCHISON EFFECT page and the Dr. Judy Wood
pages were completely ERASED a short while ago...  I believe that
directing energy of specific FREQUENCIES can allow anti-gravity,
and can release the STRING energies that make up matter itself.
This is likely the method used by the Egyptians to CUT huge, 30 to
100 ton rocks, and to lift them for miles to the constructions sites.
This is also how the Mayans could cut miles of mountain rock to
make a square, laser-straight cave, tunneling from one side of the
ANDES, down and  over three miles under the Pacific - over 4,000
years ago!

If you need a PLAYER to PLAY every single known format of video,
including Youtube FLV files, get a free KLITE CODEC player.
Download and install.   .KLITE CODEC



robin dusty graves
robindustygraves.com
gravitationalresearch.com
dustygraves.com
robin@dustygraves.com
kidbots.com
robindustygraves@kidbots.com


kidbots.com   -- how to use old 286, 386, etc. computers to make

home made roBOTS and controllers for KIDs - free

kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html  --
remote controls for birds - every FEMALE must read !

kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html  
-- a growing archive of inventions I have made over the years


kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html
-- burning WATER instead of gas in your car


Created on October 1st 2012, just in time for the END of the EARTH
( according to the MAYAN CALENDAR

CLICK HERE that ends around Christmas, 2012! )

(Update on Dec 13th 2012 --- so far, other than a few
"end of the World barbeques" I have not seen anything notable except
a "Mayan End of the World" SALE at a furniture outlet! ([Hurry, its
only until December 21st- If the world ends, you don't
pay a CENT! ] It appears that the date, December 21st, is the START
of an era of change, rather than a specific moment...
You would, of course, have to be blind, deaf, and dumb, not to notice

the massive, multi-billion dollar construction projects
around the world, that are totally un-mentioned in the world
news, that are being sped-up and increased at a frantic pace.
The complete LACK of any news or mention of these massive
projects, speaks louder than some lame explanation would!)

This website is a placeholder for the moment, until I get time
to compose the entire site. Unfortunately, I have LOST a
great deal of documentation over the years, so I would take
a while to find and collect most of it!

My thanks to the brilliant R.R. Hosbons, for inventing the

"Dusty" used between Robin and Graves, to give me a unique name
amongst hundreds of millions of web users!

___________________________________________________
___________________________________________________

 

**J. Robert Oppenheimer

HISTORY - Yeah- Right . . .

When Scientists at Atomic Energy asked me what I thought of
Oppenheimer, I told them that I would hate to be him - wire-tapped,
followed, harassed, Black-Listed, Monitored, under constant
24 hour Surveillance, etc. --  the look on their faces was
one of shock - what ? ! - simply not so - Oppy was a revered
Scientist and "public" figure ! What was I possibly talking about ? !
Yeah . . . Right . . .
What the public "knows" about Oppy is whatever the Feds
"want" the public to know - nothing more, nothing less.
There is an expression "The man who knew too much", and
Oppy exemplifies the concept. Much of what he knew, he
personally ( as would any sane, reasonable, human ) did
not agree with, but - "all is fair in love and WAR, and it was
indeed a time of WAR . . . "sacrifices" must be made, "Choices"
must be made, "The good of the Many" etc. . .

 Bits and pieces of information about the World War Two,
that pop up now and then, as documents are DE-CLASSIFIED,
start to show " the OTHER" side of what was happening in
"TOP SECRET" terms. Most of it is rather embarassing for the
people and the governments involved, as it shows immoral,
if not psychopathic behviour on the part of the people in
charge.

 One typical, tiny, teeny, little snippet of information comes
collectively across the United States from Nurses who were
attending Terminal Cancer Patients. They state that a group of
Scientists and Doctors would arrive at their facility, and set up

research around a select group of dying patients, completely
taking over their care, ostensibly to "test" new treatments.
ok. However, in every case, during the "treatment" and
intense 24-hour monitoring of these patients, the Nurses
heard the patients, formerly rather weak and sedate,
SCREAMING, until they died. The nurses were told NOT
to interfere in any way ( and mind their own business ).
 So what were these "treatments"? Snippets of information
show a Military program to TEST the effects of Radiation
poisoning and in particular, the effects of PLUTONIUM
poisoning and contamination, since the factories ( all TOP
SECRET at the time) had vast amounts of the Plutonium
powder sitting around in large flat trays. Of course we now
know that not only is Plutonium a messy Radioactive
contaminant, which will cause a rather bizzare death, but
it is a rather nasty "poison" in its own right. The Military
wanted "test subjects" to administer with  Plutonium,
so they could "watch" how it would kill Factory Workers

in the massive Plutonium factories, if they were accidentally
 exposed.  What the heck, the
Terminal Patients were going to die anyway, so who cares?
"Sacrifices" must be made . . . "Choices" must be made . .
"The "GOOD" of the "WHOLE" must be weighed against
the mere "life" on any individual" . . . blah , blah, blah.
The Nurses who had to endure listening to the Screaming
of their former patients, unto death, were traumatized
severely, since they had come to know and CARE for the
people ( victims ). END OF TINY SNIPPET . . .

 A couple of pieces of information come together in another
look at what was really happening during the war . . .
In Canada, mostly Female workers were in Factories.,
machining and  putting together bombs and ammunition
for the soldiers overseas. (( my mother worked in a factory
in TORONTO )) These were all made with COPPER AND
BRASS. I had the copper/brass nose assembly ( it was stolen)
for a large typical bomb. I took it apart to find an intricate,
finely machined, rather complex puzzle of rings, internal
and external, all threaded together so that a trail of black
gunpowder, that would be detonated by a set of bevelled
pressure pins, could be made to burn through layers of
internal rings. The layers were connected by a hole going
from one layer to the next - if you rotated the rings so the
holes were in a line from top to bottom, the powder would
burn quickly from the detonation points, straight down
to the bottom of the nose piece, and the bomb would
explode quickly after impact. However, if you rotated
each ring so the holes were on opposite sides, the powder
would have to burn from one side of the top ring, all
the way to the hole on the other side, down into the
next ring, then burn all the way around the ring to the
hole on the opposite side, etc., so there would be a huge
delay in detonation, until the powder burned through
every single layer of rings.
 BOTTOM LINE, -- this single nose piece, weighed 10 pounds
of machined, high-quality, brass and copper parts -- and
was just one tiny component of millions of pieces of
bombs and bullets and shells that left Canada - to be
shipped overseas . That makes tons and tons of high
quality brass and copper being shipped overseas - largely
by the "VOLUNTEER" "MERCHANT MARINE" - non-military,
non-pensioned, no-status, dedicated maritimers who ran
convoys of materials across the dangerous North Atlantic.
( who, after the war, were totally ignored by the Canadian
Government - no pension, no help, nada. thanks. now
just go away and fish or something ! )
 A great deal of information has surfaced about the
mathematicians in England breaking the German Banking
"enigma" machine codes - Something that Hitler was
repeatedly told was impossible...  However, the Germans
were doing the same thing, and on a regular basis, all
the code books had to be changed on the Allied ships
as well. Here is where it gets interesting. Statistics released
showed the "tonnage" of ships lost or sunk during the war.
What was peculiar, on the Canadian charts, was the
Square-Wave appearance of the graph - it was not a
typical wiggly line bouncing up and down with trends
in Atlantic storms or offensives of German U-boats - nope,
it was a regular, repeating, square wave - high for a while,
then low for while, zipping up to high, maintaining that
high level, then dropping for a while - totally non-random.
Then, we correlate that square wave to the CHANGING of
the code books - The Americans and British war ships would
all get new code books that had not been cracked by the
Germans, but the Canadians, and the "Volunteer"
"Merchant Marine" would, as sitting ducks, or decoys,
NOT be given the secure codes - this meant that the
Germans would continue to get lots of "decoded"
morse code transmissions, and would think that they
possessed the cracked codes. They could also target
and sink the "Volunteer" decoys ( Canadians ) while
the British and Amercian Warships would be safe. Thus
the Germans would be "busy" on non-military targets.
EVENTUALLY, the "COLONIES", the Canadians, would
get the new codes, and the tonnage lost at sea would
drop. Thus the "Square-Wave" graphs. Whoops, - emabarrassing
as hell - can't let that happen again,  and in comes the
"FREEDOM" of information ACT, @@ that curtails anything
that even has a remote chance of embarrassing anyone !
 Reporters regularly show "FREEDOM" information results,
with an entire document blacked out with a black magic marker
for 20 pages - only words here and there like " and",  "is"
"was",  " a " ,  "the",  etc. are not blocked out ! Hilarious!
It gives "FREEDOM" a whole new meaning. !
 Ah - back to the war.
So, in Toronto, Canada, we have a virtual army of women,
making TONS of copper and brass ammunition, being
shipped across the cold, dangerous, North Atlantic, to
"our boys" on the front lines. Enter more documents that
accidentally got released. If there was a shipment of
copper and brass munitions, leaving Canada, often,
magically, there would appear, by luck, a U.S. military
ship that was heading in the same direction ! The tons of
copper and brass ammunition would arrive safely on the
docks of Brittain, and be unloaded. . . The Canadian
ship would leave on its journey across the treacherous
seas, - however, the military warship escort would be missing...
AND, the tons of Copper and Brass ammunition would
be loaded onto trucks, and head out -- on its way to the nearest
American Naval base, where it was loaded back on a ship,
and taken to United States, where the Copper and Brass
was melted down to make the thousands of tons of
copper wire needed for the massive electromagnetic
separation coils for the Plutonium Factory...
 Meanwhile, back on the front lines, the Canadian
soldiers were constantly running low on ammunition !
Somehow, this kind of stuff never made its way into any
of the "HISTORY" books, that I had in school -
 (( on that note, my plumber friend discovered that a brass
90 degree pipe elbow that he used, went from 5 dollars
Canadian, to 70 dollars, and all copper and brass prices
skyrocketted. Apparently, all copper and brass scrap was
being bought by China, so prices increased. I knew immediatley
that some country, somewhere was building a Nuclear
refinery to make weapons, and needed the same "thousands
of tons" of copper wire, that was needed earlier, by the U.S. - -
Yup - eventually the "secret" asian, nuclear facility was
announced on the news . . . quite predictable . . .  ))
 More on Oppy and the war...
Canadians generally do not know much about "the BOMB" and
how important CANADA really was, in getting the materials
to make it.
 All the URANIUM used initially for the U.S. Atomic Bomb effort,
came from Canada.  Canada delivered enough Uranium,
to make 3 complete nuclear bombs. . .  but, wait a minute . .
Only a single bomb " officially " used Canadian Uranium - that
would be the "Trinity" test bomb at Los Almos, New Mexico,
widely published, and a major event in the current biography
of Oppenheimer.
 More Snippets of Information which surfaced -- As everyone knows,
the Canadians and the British Scientists were working closely
with the Americans in creating the bomb. Many British and
Canadians were working at the Nuclear site in the U.S.
 Here is where it gets interesting - the INSTANT, that Canada had
supplied enough Uranium, to make 3 entire nuclear weapons,
the U.S. quickly and quietly rounded up ALL Canadian and
British scientists, under armed military guard, and put them on
military planes that took them to the nearest airfield in Canada.
There are stories of a Scientist, at work in his office, approached
by two  military guards,( armed with machine guns )  and being told
to take only his personal items from his desk ( a picture of his
family, etc,. ) escorted to his living quarters, and again, packing
only his personal clothes and items, and being taken to the runway,
and put on a military plane. All Visas, Passports, Government
Identification, etc were confiscated. Arriving in Canada, in the middle
of the night, at a closed airstrip, he was left with his luggage,
on the runway, in the dark, and the plane took off. ! ! !
 My "Canadian" history book describes this as :
"The Canadians and the British DECIDED, on this date, to use
Nuclear Energy for peaceful purposes . . ."
 Ah, but wait, it gets more interesting ( real history, is, without
exception, incredibly interesting ) . . .
 While there is a great deal of information on the MANHATTAN
PROJECT, it is the information that is "missing" that needs
a closer look . .  The Americans wanted PLUTONIUM - which,
they had to "MAKE". Plutonium is a by-product of a man-made
nuclear reaction, generally does not exist on Earth - ie, you
can dig for, and mine, Uranium, in Canadian mines, but,
Plutonium is "manufactured". So the Uranium that was mined
in Canada, that could make 3 entire bombs, is somewhat
unaccounted for. There is Trinity, but what of the "other 2 " ?
 An American in San Fransicso bought an older home, and
eventually found, in a dusty corner of the attic, a CHEST, which
had clearly belonged to the retired Military man who had
lived there. Inside were strange blueprints and documents
and notes that were about a hitherto unknown atomic bomb
effort. ( This is all on the internet, if the Feds, the Gooks, the
Spooks, etc. haven't deleted it all! ) The Initial Atomic Bomb
design used two railway boxcars to carry the two halves of the
bomb (safely separating the critical nuclear mass! ) The design
was intended to be put on a ship, assembled, and steering
the boat into a busy ocean port of an enemy. This was
thought to be the safest way to deliver the nuclear device.
 At the naval base on the California coast, "BLACK AMERICAN"
troops were stationed for the dangerous task of loading ships
with ammunition for the Pacific war.  About 3 AM one morning,
an "accident" happened, and the ships in the harbour exploded,
causing a blast that people 120 miles away saw. Just by luck,
across the bay, at 3 A.M., a military crew happened to have
high-quality high-speed cameras running ( 10,000 frames a second)
and by luck again, a military reconassaince plane happened to filming
with high speed film, in the dark, at 3 am in the morning, from
above,  so the event was well filmed. ( by luck ).
An entire train had been loaded onto one of the cargo ships,
and all contents were cataloged - except for two . That ship,
after the explosion, completely dissappeared. Other ships were
blown completely out of the water. The 2 or 3 hundred "Black
American" workers on the docks were killed or dying, and the
100 or so in the barracks, off duty, were immediately told to
continue loading explosives on the incomming ships, and to
clean up the mess. A group of "Black Americans" protested,
stating that working conditions were too hazardous, and this
group was immediately
court-martialled, and sent to life-
imprisonment in SOLITARY confinement.... ( I guess they
never got a chance to tell anyone the story ! ) The documents
in the chest, found in the attic, mention that the mushroom cloud
above the nuclear blast at the Trinity test, was identical to the
mushroom cloud over the blast at the military docks in California.
 Very interesting !
So it looks like Oppy, et al, tested the Atomic Bomb in a harbour
just to see what the damage would be ( obviously- not enough ).
 That leaves the 3rd missing "CANADIAN" fuelled bomb.
Curiously enough, in a GEOGRAPHY class, we were studying the
different types of deserts around the world ( did you know that
the snowy, desolate Canadian High Arctic in the North, is a desert ?)
and we came across one glaring anomaly, in AFRICA. In a vast
section of fairly normal "sand" desert, is a large circle, stretching
for a few miles, of what is known as "the glass desert", and the
sand has been melted into a solid disk of glass. Now broken into
a vast field shattered chunks of glass, with expansion and
contraction forces, this huge area of glass defies traditional
geology. Unless you detonate that 3rd missing Atomic Bomb
in the middle of nowhere, and then all the pieces of the puzzle
fit together.
 I wondered what secrets Oppenheimer knew that would make him
a lifetime target of 24 hour Government surveillance, and bit by bit, some of
the information is becoming known. However, I suspect that he
knew much, much more, that likely will never be made public.
Paper-Shredders are busy grinding away, as you read this. . .
 As I said to Scientists at Atomic Energy - I would NOT want to be
him - particularly when you look at what happened to his daughter,
who was a brilliant as he was, and again, was Black-listed, followed,
wire-tapped, and generally harassed ( to death ) for her entire life. real history.
Unfortunately , real history often does not have a happy ending.

 

@@
Note that the result of the inadvertant "leaks" of embarrassing
information, was the complete over-haul of the "FREEDOM
OF INFORMATION ACTS" of the United States, Britain, and
Canada, where a former request took something like
$600 and Six Weeks, now it takes $6000 and 6 months or
even more, since... the governments are cross-checking
to see if the information is embarrassing TO OTHER
countries and " OTHER" aspects of the war, that are not
immediately apparent in the document itself !

 

 

 

*@*@

 

 

John ( Kenneth )  Hutchison

You can read a bit more about John Hutchison on the page


http://kidbots.com/WEBADD/VARIOUS/MARYAM/MARYAM.html

(and read about Dr. Judy Wood )

My personal "take " on this is :

John gained international attention by bombarding materials with
FREQUENCIES generated by Military Surplus equipment in his
apartments ( to the tune of about 3 tons ). Radar, Tesla coils,
Frequency Generators, etc. abound.

Since the fundamental componenets of " MATTER " are just
" FREQUENCIES " his experiments caused 'impossible' effects,
since steel would burn, things would float in the air etc.

Many scientists witnessed these things.

The U.S. Military-Industrial Complex (Feds, Spooks, Gooks, MIB, etc.)
were absolutely interested. They re-created his entire apartment
full of tons of Military Equipment, to study the effects themselves.
- - - nothing worked - - - . You take a group of incredibly brilliant,
"experts", and give them used equipment from the 1950's, 1960's,
1970's etc. and tell them to "replicate the impossible".

NADA.

(( interesting tidbit. . .  As a new, "Junior" lab guy, at Atomic Energy,
I was given the task of using an entire 3 ring binder of instructions
to "ZERO" a machine - a massive monster with steel cabinets filled
with rack-mounted modules, each loaded with hundreds of precision
dialled variable resistors. What I did not know, was that no one,
ever, including the people that MADE the machine, had ever
"ZEROED" the machine. This is because every dial you turned on
every module on every cabinet was "ANALOG" ( not digital ) and
if you perfectly Zeroed ( an electrical meter would show 0.0000 volts
output ) the first module on the list, the INSTANT you touched the
first resistor on the second module, you would destroy the settings
on the first module. You then would go to the third, the fourth, the
fifth module, etc. and if you went back to the first module, it would
be completely wrong !  You then started over, at the first module,
and like a dog chasing its tail, repeated the stupidity, but... getting
better and better results each time, but never, ever, getting all
modules to read 0.000000 volts ( I had very high quality electrical
meters that read to 6 decimal places ).  Of course everyone except
me knew that it was impossible to really "ZERO" the entire machine !
I stayed late at night, often until 3:00 am, going over page after page
of instructions, for a few weeks, until I did not need the 3 Ringed binder.

I started to " Just Know " the entire machine, and how each module
affected every other module. The machine worked on FREQUENCIES.
It produced a complex wave form that on the last module's output,
you could see on an OSCILLOSCOPE. This was the key. Each module
added a frequency on top of another frequency. Thus the final
waveforn looked like a complex, jagged squiggly line. Eventually I
realized that when I turned the Oscilloscope setting to look at a tiny
section of this complex, jagged waveform, output, here and there
would be found "breaks" or "uncharacteristic" higher peaks and
valleys, that seemed out of place. By going back to the control
modules and turning the dozens of variable resistors, I could
look at these tiny sections of spikes or valleys, and eliminate them
one by one, all the while, looking at the output ( an "average" )
voltage of every single module. ( I had to go to many other laboratories
and borrow a large collection of meters ! ) Thus I did not concentrate
on "ONE" module, then proceed to the next, ( and destroy the
settings of the first one ! ), as was shown in the manual, but looked
at ALL the modules at the same time, and looked at the complex
waveform , FINAL output. Eventually, I got the FREQUENCIES to
create a "smoother", more "Harmonic" ( albeit jagged ) output on
the Final oscilloscope. Since the machine's output went to a
huge hydraulic control system with massive pressure pumps, you
could actually "HEAR" the complex frequencies make a resultant
musical note. When I had gotten every single single module to
read 0.000000 Volts, and the Oscilloscope showed a nice,
consistent waveform, the musical note sounded more melodic.

I reported that I had "ZEROED" the machine, and went on my way to
another Laboratory, on another project. 2 WEEKS later, one of the
senior Technicians burst into the lab, and stated " The machine is
Zeroed! " Since I was busy on another project for weeks, I had no
idea what he was talking about. He repeated " The machine is
zeroed! " I asked what he was referring to - and he detailed the
machine. I said, "Yes, I zeroed the machine". He said, "Yes, but it's
ZERO !" Eventually I learned that no one, ever, in the history of
the machine, had ever zeroed it - including the manufacturer, who,
I learned, had flown in a technician to "CERTIFIY" the machines as
being " WITHIN SPECIFICATION". "Within Specification" was the
best that anyone had ever done, typically each value would read
0.0 volts +/- 0.016385 % or whatever - or, "CLOSE".  My machine
read 0.000000 volts throughout! I gather now, that my "TASK" of
"ZEROING" the machine- just before the expert flew in from the
factory, was to have been a "learning experience". It was - but not
what anyone expected. . .

Furthermore - at the other end of the room, was an IDENTICAL
MACHINE - that was the "baby" of the Senior Technician, and
he too, had "Zeroed" his machine ( within Specification ).

Here is the point - - -  Every single resistor, and capacitor and
transistor, etc., in every module, on these two "identical" machines was
DIFFERENT - each resistor had a value Plus or Minus 5% etc., . . .
Thus, even if you turned all the dials and controls on these
incredibly high quality, precision variable dials, to EXACTLY
THE SAME settings - the two machine would put out a completely
different WAVE FORM of complex FREQUENCIES !

(( At lunch, the Expert from the factory came over, sat down, and
asked how the Hell I got the machine to 0.000000 Volts ! ))

Back to John Hutchison. . .

One day, John went through a typical sequence of FREQUENCIES,
bombarding a test area with electromagnetic radiation from
the various generators. Nothing really happened, -- or so he thought,
and the local Vancouver (city) British Columbia ( province )
Canada ( country ) POLICE came in and took him outside in
handcuffs. Using the excuse of him having handguns in his
apartment ( which he collected and was never charged with anything )
the police kept him outside, while a BIG BLACK LIMOUSINE
pulled up and a group of men, each wearing identical black
outfits, and carrying Black briefcases, got out and went into
John's apartment. Eventually they came out, left, and the
POLICE, who really were just delaying for no reason, released
John. Inside, he was startled to find that the dishes were washed
and put away, the floors swept, and the whole place cleaned up!
((What -- Molly MAID from MIB ??? )).

 John found out that, in the apartment next to him, the toys in
the kids room were floating around the room ! The lady called
the Police, and the 24 hour surveillance team moved in -
What they wanted was the SETTINGS -- of course, back in
TEXAS, where they had assembled the identical machines that
John was using, and twiddled dials for weeks, NOTHING WORKED !

So when John absolutely produced an impossible scientific
result - they measured every single distance between every single
machine, and did a huge PHOTO SHOOT of every single
dial on every single machine...  ( which is why they cleaned
and tidied up everything - for the photographs )

Back in TEXAS, they carefully replicated every distance and every setting
and got ABSOLUTELY NOTHING !

- - - Which, if you read my adventure on "ZEROING" any complex
analog 1960's to 1970's machine, is the expected result !
-- - - Furthermore, John did not just "SET" each machine to " ONE"
setting, and watch the result - he constantly, from years of experimental
observation, CHANGED the frequencies in a specific pattern.
The final result that the Spooks ( M.I.B. -- Men In BLACK ) photographed,
was just the last step in a SEQUENCE that could take all day !

 -- Thus, when John got a sponsor in GERMANY, that would fund
further research, he packed up all his equipment, and headed for
GERMANY. However, his equipment never made it, and he discovered the
pansies in the CANADIAN GOVERNMENT had confiscated all his
equipment !

 -- back to the U.S. Military-Industrial complex in TEXAS. . .
-- on the internet, was a report of a new, young, Scientist, hired
in Texas. He was given a tour of the COMPLEX, and much to his
dissmay, in a huge, aircraft-Hanger sized building, he discovered,
in the middle, all by itself, all of John Hutchison's Equipment !
If you read any Scientific magazines or are on Science channels,
or on Science Websites on the internet - you can easily identify
John's Equipment from the interviews, photos, and videos of
his apartment.

 As I pointed out above, you can have two " IDENTICAL " machines,
and even if every single setting is " IDENTICAL " you will get
different output results.

-- So the obvious solution is to get the entire machine assembly that
you have achieved a specific result on. !   Then, and only then are
the readings of any value.
-- Second, you have to carefully go through every step in the SEQUENCE
of FREQUENCIES that John Used, to get the identical results...
 I would assume that the SPOOKS were carefully monitoring every
detail of his work that day -- and could go through the sequences
using his " ORIGINAL " equipment, until they got similar results...

John, being deliberately delayed by every ploy possible by the Canadian
Government, eventually got a CANADIAN SUPREME COURT JUDGE
to verify that the CANADIAN GOVERNMENT acted illegally, and that
they were ordered to RETURN his equipment. He had no idea that
his entire setup was being frantically tested 24 hours a day, by teams
of specialists in TEXAS ! He did, eventually get his property back,
but, after being in the hands of some of the most brilliant Military
designers in the world ( -- the people who actually designed and MADE
this type of equipment in the first place ) his "returned" equipment
did not function properly after that ! ( oh my, what a coincidence ! )

So what of his "HUTCHISON EFFECTS " ?
 Metal catching fire, metal dissappearing with holes appearing and
bending like melting plastic, lightning bolts of electricty snapping
around metal objects, solid masses of iron floating in the air . . etc. ?

Sure enough, in rather short order, we have the magical dissappearing
sections of the buildings in the so-called 911 "terrorist" attack.

I saw an interview with a Janitor from one tower, who said that on the
floor ABOVE where the supposed plane hit, there were no walls,
no desks, no offices at all - just huge black towers all over the
level, connected with thick black electrical cables. He thought they were
massive battery back-ups. Whatever.

As Judy Wood points out on her web site, everything below that floor
( with strange black towers ) all the way to the bottom 3 levels of the
twin towers, simply turned to NANO-PARTICLE " DUST" powder.

Bottom line, by stealing John Hutchison's equipment, the Spooks
figured out the HUTCHISON EFFECTS, and WEAPONIZED it.
As Judy points out - with this equipment and Hutchison EFFECT,
it is purely a matter of how much POWER ( the thick black cables )
you can put IN. If you had a big enough power source, you
could cut the EARTH in half - turning a slice into pure NANO-DUST
particles.

I would fear for John's safety, and do wonder why I have not heard
from him for a year or two . . . - he typically would be giving lectures on
a tour, somewhere - but - NADA. . .

ANYHOW - that's my " TAKE " on the Hutchison Effects.

One note that I could kick myself for - During a visit in 1990 - 1991 to
Vancouver, someone mentioned that I should REALLY talk to a
guy called Hutchison, who they knew, since he talked the same way
I did. I did not know about John at that time, and never went
out of my way to track him down. OUCH. That hurts. What a
hell of a missed opportunity !

FURTHERMORE - I hang out in the OTTAWA - PEMBROKE - DEEP RIVER
corridor, and shortly after 911, where they brought in a constant flotilla
of dump trucks putting dirt on top of the massive piles of NANO_PARTICLE
dust, I saw hundreds of brand new, shiny trucks with a V shape bucket -
if you were driving behind them ( which I did ) you saw the bucket was
sloped straight on both sides to a point at the bottom where a two foot or
so wide belt stuck out of a trap door on the back. The driver could dump the
load of dirt, and never leave the cab, by driving over a trench, turning on the
conveyor belt, and have a buldozer quickly cover the trench. This
wagon-train of specialized trucks carried on 24 hours a day - sometimes 
a group would travel with a gasoline tanker in the middle to keep the
relay going. I figured they were carrying the highly dangerous
NANO_PARTICLE, Hutchison Effect, sub-atomic, dust from 911, but
one day there was an accident near Petawawa ( The military base )
that blocked the entire highway. Police re-routed traffic through the Military
testing site beside the highway - - a no-man Zone of extremely dangerous
unexploded bombs, grenades, rockets, etc. Then, I saw where the
trucks were going- back into the forbidden fields, to dump the contaminated
Hutchison Effect Nano-dust.  At the Russian Nuclear disaster site at
Chernobyl, the solution was to dump millions of tons of cement
and dirt on the reactor to simply smother and burry it - it is still highly
active and continuing to "burn" in a nuclear sense, today, but is
simply "burried". Same with the Hutchison Nano-Dust - it is still
as deadly, and it still contaminates anything it touches, but is simply
burried in long, thin lines, in deep trenches, to disperse the intensity.
" Only in Canada " you say?

 

 

 

>

 

 

>

 

>

 

 

 

 

 

 

>

 

 

>

 

 

_________________________________________________________

 

REGISTRANT          :            robin dusty graves

REGISTRANT EMAIL    :   (NEW) rockin.robin.dusty.graves@gmail.com

          ( OLD)   robindustygraves@gmail.com (( After 5 years of logging in to see:

        "There do not appear to be any other OPEN SESSIONS", I now log in to

        see " Would you like to CLOSE all other OPEN SESSIONS" ! ? ))

REGISTRANT ADDRESS:  2222-4 Carling Avenue, Ottawa, Ontario, Canada, K2A 1H3

REGISTRANT PHONE:       1- (780) - 807- 0217   and 1- (613) - 717- 2777

 

ASSOCIATED WEB SITES:

 

 

robindustygraves.com

 

robindusty.com

 

robin-dusty-graves.com

 

dustygraves.com

 

gravitationalresearch.com

 

kidbots.com

 

HELWYCHZ.com

 

PSYCHOMOBZ.com

 

QUEBEQUISTAN.com

 

 

        NEW LINK

EARTH_MONKEYS

 

 

 

_____     _____     _____     _____     _____

 




Because illegal hackers have decided to spam the name
" robin dusty graves"
or " robindustygraves "
I have decided to use the same tactics that they use, and load my
REAL web pages
with the key search words that would be used by search engines such as
Bing, Yahoo, Google, etc.

As it now stands, searches are re-directed illegally and maliciously
by spammers,
who create thousands of fake web pages, that Microsoft's; BING.com,
for
example, found and displayed - while at the same time, BING, in a
search for 4 or 5 months,
refused to find DUSTYGRAVES.COM or ROBINDUSTYGRAVES.COM  when
searching for 'robindustygraves' ! ! ! Go figure. (( This demonstrates the skill
of the hacker/spammers in targeting the algorithm software used by BING,

Yahoo, Google, Yandex, etc. BING and Google have changed their software,
and Yandex always had a different search engine, so that now more of the
valid search results show on the first pages - however, the spammer/hackers
are always working to catch up with the new technology ))
 The fake web pages re-direct to pornography, PAY-PER-CLICK websites, that
the spammers get paid a fraction of a penny for each person who
accidentally clicks on them,
and to pages where the SERVER is deliberately set up to spam with
POP UPS that
state things like " MICROSOFT WINDOWS ANTI-VIRUS HAS DETECTED
A VIRUS -
CLICK HERE to continue Scanning, and Remove the VIRUS" - If you
click on ANYTHING,
--the little "X" in the top corner to close, the box on the bottom that
states "CLOSE", --
any action besides CTRL-ALT-DELETE ( to bring up the Windows Task
Manager, to
CLOSE your Browser entirely! ) it will download a virus that generates a
continual barrage of
fake VIRUS warning alerts, that demand Visa and Mastercard to remove-
If you are foolish
enough to actually GIVE your Visa or Mastercard, the information is
used to make illegal
purchases, AND the virus is NOT removed!
 Many fake web  re-directions take you to a page that appears to "LOAD"
for a long time
with an hour glass or "now loading" ICON, but, while that is happening,
your IP address,
your specific geo-loacation, your specific information on YOUR
computer, etc. is being
gathered, and by the time the fake web page actually loads, often
with a FAKE web
"SEARCH PAGE" ( Pay-per-click), your computer is already
compromised, and is
subject to further hacking from that point onwards...


DUSTYGRAVES
Dusty Graves
dustygraves.com
DUSTYGRAVES.COM
(( robin dusty graves ))

 

(( ROBIN DUSTY GRAVES ))

(( robindustygraves ))

(( ROBINDUSTYGRAVES ))

(( robindustygraves.com ))

(( ROBINDUSTYGRAVES.COM ))

(( robin@dustygraves.com ))

(( ROBIN@DUSTYGRAVES.COM ))

(( kidbots.com ))

(( KIDBOTS.COM ))

(( ROBINDUSTYGRAVES@KIDBOTS.COM ))

(( robindustygraves@kidbots.com ))

(( GRAVITATIONALRESEARCH ))

((GRAVITATIONAL RESEARCH))

(( gravitationalresearch ))

((gravitational research))

(( GRAVITATIONALRESEARCH.COM ))

(( gravitationalresearch.com ))

 ___________________________________________________

____________________________________________________

 

Real Science is a fascinating subject, unlike the decades of what was
taught in schools that
I endured, that tries to KILL every shred of imagination, of hope,
of possibility, and instead,
fills the time with memorizations of WHAT CAN NOT BE DONE!
Nothing can travel faster than the speed of light...
Nothing can get colder than absolute zero.
Matter can neither be created nor destroyed... etc etc.
(All wrong) Search "Richard Feynman", for a lecture on this!
Every now and then, there is an 'Educator" who is both
interested and (therefore)  interesting, who prevents the world from
sliding back into<
the dark ages!

 

 

 


With the String theory, and new discoveries of the last few years, we are
on the brink of
an entirely new era - and I can't wait to see what happens next! This is a
wondrous and
magical time, with the doors of science wide open again - and the view
is breathtaking!

 Clarke's Three Laws are three "laws" of prediction formulated by the
British writer
                Arthur C. Clarke. They are:

1/ When a distinguished but elderly scientist states that something is

 

possible, he is almost
       certainly right. When he states that something is impossible, he is

very probably wrong.
2/ The only way of discovering the limits of the possible is to venture

a little way past them
          into the impossible.
3/ Any sufficiently advanced technology is indistinguishable from magic.

(thanks to wikipedia)

 

 

have fun

 

Robin Dusty Graves

 

 

 

 

Burning WATER (h2O) instead of gasoline in your car:

kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html

kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html

 

 

Remote Control "MUTE" button for BIRDS (Every Female must read! ) :

kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html

 kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html

 

 

BELOW: The original PIPE BOMB version

of my INVISIBOLT

A growing number of INVENTIONS I have developed over the years:

kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html

 kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html

 

 

 

 

How to take an Obsolete old computer, like an 8088, 8086, 80186,

80188, 80286, 80386 etc,

and old discarded electronics, to build a FREE, home -made robot and controller:

kidbots.com

 KIDBOTS.COM

 

 

have fun

ROBIN

DUSTYGRAVES

Dusty Graves

dustygraves.com

dustygraves.com

DUSTYGRAVES.COM

(( robin dusty graves ))

(( ROBIN DUSTY GRAVES ))

(( robindustygraves ))

(( ROBINDUSTYGRAVES ))

(( robindustygraves.com ))

robindustygraves.com

 

(( ROBINDUSTYGRAVES.COM ))

(( robin@dustygraves.com ))

(( ROBIN@DUSTYGRAVES.COM ))

(( kidbots.com ))

 kidbots.com

 

(( KIDBOTS.COM ))

(( ROBINDUSTYGRAVES@KIDBOTS.COM ))

(( robindustygraves@kidbots.com ))

(( GRAVITATIONALRESEARCH ))

(( GRAVITATIONAL RESEARCH ))

(( gravitationalresearch ))

(( gravitational research ))

(( GRAVITATIONALRESEARCH.COM ))

(( gravitationalresearch.com ))

(( gravitational research dot com ))

 gravitationalresearch.com

 

 

 

EFIE SIMPLE CHEAP PART ONE YOUTUBE
Demonstration of my EFIE in use
YOUTUBE_EFIE_PART_1
ADJUSTING THE OXYGEN SENSOR ON A CAR
FOR BURNING HHO (WATER)

http://www.youtube.com/watch?v=N02-8XM0G2Q

 

 

 






EFIE SIMPLE CHEAP PART TWO YOUTUBE PARTS
and DIAGRAMS of my efie
ADJUSTING THE OXYGEN SENSOR ON A CAR FOR
BURNING HHO (WATER)

YOUTUBE_EFIE_PART_2

http://www.youtube.com/watch?v=4C9WIhtETho

 

 





ELEMENT GOVERNMENTIUM
A NEW discovery of the biggest Element (Gv) ever found
ELEMENT_GOVERNMENTIUM
http://www.kidbots.com/WEBADD/VARIOUS/GV.html

 



 

ROBINDUSTYGRAVES.COM

 

 

 

 

ROBINDUSTYGRAVES.COM

 

ROBIN DUSTY GRAVES

 

 

 

 

robin dusty graves
robindustygraves

robin dusty

robindusty.com

ROBIN-DUSTY-GRAVES

robin-dusty-graves.com

ROBIN DUSTY GRAVES
ROBINDUSTYGRAVES
ROBINDUSTYGRAVES .COM
robindustygraves.com
dustygraves.com
robin@dustygraves.com
DUSTYGRAVES.COM
ROBIN@DUSTYGRAVES.COM

gravitational research
GRAVITATIONAL RESEARCH
gravitationalresearch.com
GRAVITATIONALRESEARCH.COM

KID BOTS

kid bots
kidbots.com
KIDBOTS.COM
robindustygraves@kidbots.com
ROBINDUSTYGRAVES@KIDBOTS.COM
___________________________________________________ ____

 

REGISTRANT         :            robin dusty graves

REGISTRANT EMAIL :     (NEW) rockin.robin.dusty.graves@gmail.com

       ( OLD) robindustygraves@gmail.com { After 5 years of signing into gmail

        to be greeted with " There do not appear to be any other OPEN SESSIONS ",

        I am now greeted with " Would you like to close all other OPEN SESSIONS " !

        I have logged in, changed passwords,CLOSED all open sessions,  logged out, 15 times

       in a row, only to be greeted with more OPEN SESSIONS !}

REGISTRANT ADDRESS:  2222-4 Carling Avenue, Ottawa, Ontario, Canada, K2A 1H3

REGISTRANT PHONE:       1- (780) -807- 0127

                                           Also  1- (613)- 717-2777
___________________________________________________ ____

 

 

ASSOCIATED WEB SITES:

 

 

robindustygraves.com

 

robindusty.com

 

robin-dusty-graves.com

 

dustygraves.com

 

gravitationalresearch.com

 

kidbots.com

 

HELWYCHZ.com

 

PSYCHOMOBZ.com

 

QUEBEQUISTAN.com

 



    NEW LINK
      EARTH_MONKEYS
   

 

 

 

 

 

 

 

 

" robin dusty graves"
 " robindustygraves "

***       *******     ******     ******     ******     ******     ****** ***** *** ** ****

***       *******     ******     ******     ******     ******     ****** ***** *** ** ****

Because illegal hackers have decided to spam the name

******       *******     ******     ******     ******     ******     ****** ***** *** ** ****

" robin dusty graves"
or " robindustygraves "

******      *******    *******    ******    ******    ******   ******    *****  ******


I have decided to use the same tactics that they use, and load my REAL web pages
with the key search words that would be used by search engines such as
Bing, Yahoo, Google, etc.

As it now stands, searches are re-directed illegally and maliciously by spammers,
who create thousands of fake web pages, that Microsoft's; BING.com, for
example, found and displayed - while at the same time, BING, for about 4 months,
refused to find DUSTYGRAVES.COM or ROBINDUSTYGRAVES.COM  when
searching for 'robindustygraves' ! ! ! Go figure. (Bing has changed their algorithm,

but the initial success of the hacker's scam, indicates that they understand

the internet extremely well!)


 The fake web pages re-direct to pornography, PAY-PER-CLICK websites, that
the spammers get paid a fraction of a penny for each person who accidentally clicks on them,
and to pages where the SERVER is deliberately set up to spam with random POP UPS that
state things like " MICROSOFT WINDOWS ANTI-VIRUS HAS DETECTED A VIRUS -
CLICK HERE to continue Scanning, and Remove the VIRUS" - If you click on ANYTHING,
--the little "X" in the top corner to close, the box on the bottom that states "CLOSE", --
any action besides CTRL-ALT-DELETE ( to bring up the Windows Task Manager, to
CLOSE your Browser entirely! ) it will download a virus that generates a continual barrage of
fake VIRUS warning alerts, that demand Visa and Mastercard to remove- If you are foolish
enough to actually GIVE your Visa or Mastercard, the information is used to make illegal
purchases, AND the virus is NOT removed!
 Many fake web  re-directions take you to a page that appears to "LOAD" for a long time
with an hour glass or "now loading" ICON, but, while that is happening, your IP address,
your specific geo-location, your specific information on YOUR computer, etc. is being
gathered, and by the time the fake web page actually loads, often with a FAKE web
"SEARCH PAGE" ( Pay-per-click), your computer is already compromised, and is
subject to further hacking from that point onwards...

THUS, Here are typical "REAL" SEARCH RESULTS FOR " robindustygraves" :

 

 

SIMPLE EFIE ( OXYGEN SENSOR ADJUSTER ) :

EFIE SIMPLE CHEAP PART ONE YOUTUBE
Demonstration of my EFIE in use
YOUTUBE_EFIE_PART_1
ADJUSTING THE OXYGEN SENSOR ON A CAR 
FOR BURNING HHO (WATER)

http://www.youtube.com/watch?v=N02-8XM0G2Q

 






EFIE SIMPLE CHEAP  PART TWO  YOUTUBE  PARTS
and DIAGRAMS of my efie
ADJUSTING THE OXYGEN SENSOR ON A CAR FOR 
BURNING HHO (WATER)

YOUTUBE_EFIE_PART_2

http://www.youtube.com/watch?v=4C9WIhtETho

 






ELEMENT GOVERNMENTIUM
A NEW discovery of the biggest Element (Gv) ever found
ELEMENT_GOVERNMENTIUM
http://www.kidbots.com/WEBADD/VARIOUS/GV.html

 



 

BIRD_BRAINZ
A look at HUMAN eye sight and COLOURS and Dinosaurs and GIRLS
BIRD_BRAINZ

http://www.kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html

 

 






MAYAN_WRITING
Why are there only 4 partial written BOOKS from over
70 MILLION Mayans?

MAYAN_WRITING
http://kidbots.com/MATH/codex.html

 

 

 



30 TON STONE cut and moved by 97 pound MAN (alone)


GRAVITATIONAL RESEARCH .COM
The ORIGIN of the EARTH, of MANKIND, and EVERYTHING
(sounds like Douglas Adams!)

GRAVITATIONAL_RESEARCH

http://www.gravitationalresearch.com/

 

 

 







ROBINDUSTYGRAVES.COM
A Web Site created JUST to re-direct some of the Illegal,
Malicious, Spam TRAFFIC

ROBIN_DUSTY_GRAVES.COM
ROBINDUSTYGRAVES.COM

 

 

 

 



http://kidbots.com/WEBADD/A_KID_OR_MACHINE.jpg


KIDBOTS.COM . . .Using old IBM PC 286 - 386 type computers as
ROBOT CONTROLLERS free for kids

KIDBOTS.COM
KIDBOTS.COM

 

 

 

 




OBAMA SUPER STAR VIDEO
OBAMA_SUPERSTAR_VIDEO
http://www.youtube.com/watch?v=bl3K4rnCzs4

 

 

 





HYDROGEN FUEL IN YOUR CAR ( water ) instead of gasoline
HYDROGEN_FUEL

http://kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html

 

 

 



BELOW:    My PIPE BOMB  VERSION of my INVISIBOLT



INVENTIONS I have made
INVENTIONS
http://kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html

 

 

 





POWER BAR - A useable power bar for charging 18 items
POWER_BAR
kidbots.com/WEBADD/INVENTIONS/POWER_BAR.html

 

 

 

 





LAB A typical research lab for Engine Parts
LAB
http://kidbots.com/WEBADD/HYDROGEN_FUEL/lab.html

 

 


 

 

DUSTYGRAVES.COM
Web Site Created to re-direct some of the Illegal, Malicious, SPAM
DUSTYGRAVES.COM
http://dustygraves.com/

 

 

 






HUNTING DINOSAURS AT TIMMIES . . . Tim Hortons Website, -
my photos (constantly
HACKED by Spammers ! )
HUNTING_DINOSAURS_AT_TIMMIES

http://www.everycup.ca/profile/5025720

 

 

 

 




IS THERE SUCH A THING AS A SIMPLE EFIE?
My SOLUTION to over-complicated, over-expensive
OXYGEN SENSOR ADJUSTERS !

SIMPLE_EFIE

http://www.fuelly.com/forums/showthread.php?t=8767

 

 

 





PERMANENT, FIXED, FIREWORKS DISPLAY
PERMANENT_FIREWORKS
http://www.kidbots.com/WEBADD/VANCOUVER_LIGHTS/
VANCOUVER_LIGHTS.html

 

 

 





ATI SMBus COMPUTER CHIP DRIVER
the missing ATI SMBus driver that thousands of
people look for

ATI_SMBUS
http://members.driverguide.com/driver/detail.php?driverid=1373714

 

 





COFFEE - all about different COFFEE MAKERS and Products I use
COFFEE
http://www.kidbots.com/WEBADD/COFFEE/COFFEE.html

 

 





OVERHEATING PROBLEMS WITH A TYPICAL LAPTOP repair
ANSWERS.YAHOO.COM
LAPTOP_REPAIR
http://answers.yahoo.com/question/index?qid=20101206171958AAelVQt

 

 





When the Books of the Bible were Chosen
BOOKS_OF_BIBLE
http://wiki.answers.com/Q/Who_picks_how_books_in_bible

 

 

 





My Blackberry 9300 Review on CRACKBERRY.COM
BLACKBERRY_9300_REVIEW
http://crackberry.com/blackberry-curve-3g-review

 

 




My Blackberry 9300 Review on my KIDBOTS.COM website
BLACKBERRY_9300_KIDBOTS
http://kidbots.com/WEBADD/BLACKBERRY_9300_REVIEW/
BB_9300_REVIEW.html

 

 

 






THE ORIGINS OF MAN ( HUMANS ) ON EARTH
ORIGIN_OF_MANKIND
http://kidbots.com/WEBADD/VARIOUS/MICHAEL_TELLINGER/
MICHAEL_TELLINGER.html

 

 

 





THE ORIGINS OF CHRISTIANITY
ORIGIN_OF_CHRISTIANITY
http://kidbots.com/WEBADD/VARIOUS/MARYAM/MARYAM.html

 

 

 

 

 


1965_WIND_UP_GEIGER_COUNTER
65_WIND_UP_GIEGER
http://kidbots.com/WEBADD/WALTER_J_WOYTOWICH.html

 

 

 

 


DND_KEY_LOCK A look at typical HOME security and
some solutions
DND_KEY_LOCK
http://www.kidbots.com/WEBADD/INVENTIONS/DND_KEY_LOCK/DND_KEY_LOCK.html

 

 

 

 



 


MAINTAINING AND REPAIRING AND INTERFACING THE
PALM PILOT Z22

PALM PILOT Z22 MAINTENANCE and INTERFACE

http://www.kidbots.com/WEBADD/Z22_PALM_PILOT/Z22_PALM_PILOT.html

 

 

 

 ___________________________________________________
_______________________________

Burning WATER (H2O) (H,H,O) (Di-Hydrogen Mon-Oxide)

instead of gasoline in your car:

kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html


kidbots.com/WEBADD/HYDROGEN_FUEL/HYDROGEN_FUEL.html
 

 

Remote Control "MUTE" button for BIRDS (Every Female must read! ) :

kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html


  kidbots.com/WEBADD/INVENTIONS/BIRD_BRAINZ.html

 

A growing number of INVENTIONS I have developed over the years:

kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html


kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html

 

An Invention of PERMANENT, FIXED, Fireworks, turned on with a flick of a switch, every night!:

kidbots.com/WEBADD/VANCOUVER_LIGHTS/VANCOUVER_LIGHTS.html



  kidbots.com/WEBADD/VANCOUVER_LIGHTS/VANCOUVER_LIGHTS.html

 

 

How to take an Obsolete old computer, like an 8088, 8086, 80186, 80188, 80286, 80386 etc,

and old discarded electronics, to build a FREE, home -made robot and controller:

kidbots.com



KIDBOTS.COM

 ___________________________________________________________________________


 


.http://www.theweathernetwork.com/uk/photos/view/786/7-foot-snowman/18405068

So far, this winter, I am NOT far enough South... Just as the weather got warm,
and the roads were dry, we got a huge snowfall, that lasted days! After shoveling
snow for a few hours I built a 7- foot snowman, that says it all!

_________________

_________________________________________________
>

As usual, I am stuck in "CANADA", the great white North, where
every factory I have known has shut down... Recent Government/
Corporate policies, have every scrap of technology shutting down,
and being boxed up for shipping to CHINA, where the same
"unprofitable" factory, is running tripple shifts! Canada is
becoming a " 3rd World " country, if it does not already
deserve that status .... Products "could" be made here, but
the few remaining Engineering and Machining Corporations are
back-logged and ridiculously expensive. WAY, way, back in 1985,
a group of us tried to make, and market a small plastic
automobile device. The quote for the empty BOX, with colourful
printing, and a clear plastic display window, here in Canada was
over $6.00, The plastic injection mold halves were $60,000 with
a 6 month turnover... If there were any adjustments needed on
the molds, it would be another 6 months, and cost 10's of thousands...
We sent a prototype ( an early version, complete with many known flaws! )
to HONG KONG, and the quote was $500 for the machine molds
and 5 weeks. Adjustments were FREE, and made in a week or two...!
We got bogged down with world wide PATENTS, and to our dismay
and amusement, we discovered our 'prototype' in novelty stores,
only a few months later, shipped from Hong Kong, with the address
of a company in Great Britain! (SEE the upcoming, VANCOUVER THIEVES ! ,
which will be a huge folder when finished..) It was copied exactly
as we sent it - complete with flaws!... In a colourful box with a cellophane
window... For about the price of the empty box in Canada!

Oh Canada!


Anyhow, I have got to get dressed to go outside. I have to get some "Canadian" food for dinner...



The comment above, was added to the web January 23rd, 2012, just in time for the end of the world ( Mayan Calendar ) .

To see an entire page of my INVENTIONS,
at
kidbots.com/WEBADD/INVENTIONS/INVENTIONS.html

GO TO the original page,
INVENTIONS, CLICK HERE .
....
___________________________________________________
__________________________________________________

_________________

 

Real Science is a fascinating subject, unlike the decades of what
was typically taught in schools that I endured, that tries to KILL
every shred of imagination, of hope, of possibility, and instead,
fills the time with memorizations of WHAT CAN NOT BE DONE!

Nothing can travel faster than the speed of light...

Nothing can get colder than absolute zero.

Matter can neither be created nor destroyed... etc etc.

( All wrong! search Richard Feynman, for a lecture on this! )

There are always a handful of educators, scattered here and there,
who is interested and therefore interesting, and who keep
mankind from falling back into the Dark AGES !


With the String theory, and new discoveries of the last few years,
we are on the brink of an entirely new era - and I can't wait to see
what happens next! This is a wondrous and magical time, with the
doors of science wide open again - and the view is breathtaking!


**Clarke's Three Laws are three "laws" of prediction formulated
by the British writer                Arthur C. Clarke. They are:

1/ When a distinguished but elderly scientist states that something
is possible, he is almost certainly right. When he states that something
is impossible, he is very probably wrong.

2/ The only way of discovering the limits of the possible
is to venture a little way past them  into the impossible.

3/ Any sufficiently advanced technology is indistinguishable from magic.

(thanks to wikipedia)




have fun

 

Robin Dusty Graves

 


( Life, is an experiment, please don't destroy the Lab!
-- robindustygraves -- )



 

________________________________________
___________________________________________________
 

robin dusty graves , robindustygraves.com , robin dusty ,

robindusty.com , dusty graves , dusty graves.com , robin - dusty - graves ,

robin-dusty-graves.com , kid bots , kidbots.com ,